SL-08 LEDP WTX

Description

CONSTRUCTION:  Cast aluminum or brass 3 louver brick light.
Stamped stainless steel surface mounting bracket – no back box required.

-AL MODELS ONLY:  Cast aluminum or brass brick light with high impact white acrylic lens. Stamped stainless steel surface mounting bracket – no back box required.

3 LENS OPTIONS:
SL-08-LEDP: Standard white acrylic; creates warm 2700K incandescent like color
SL-08-LEDP-SB: Sand Blast clear acrylic; creates soft 3000K halogen like color
SL-08-LEDP-CL: Clear acrylic; bright halogen 3000K color

GASKET:  Black neosponge closed cell; .190″ thickness

LIGHT SOURCE:  12v, 8w integrated LED flat panel with external driver, warm white 3000K
630 lumens (3000K) / 680 lumens (5200K)

LIFETIME RATING:  50,000 hours

SOCKET:  None

DRIVER:  8w output, 12v AC input. Maximum distance from fixture is 18 feet.
For use with magnetic transformers only

VOLTAGE RANGE:  9 to 18 volts. Optimum operating range of 10 to 15 volts for consistent performance and brightness.

WIRING:  Red(+) and Black(-) 18 gauge zip cord from LED panel. Connects to external driver Red(+) and Black(-) 18 gauge zip cord.
Additional 6′ 18/2 zip cord supplied for wiring external driver to main cable.
For 25 foot 16/2 fixture lead wire add -25F to catalog number.

CONNECTION:  FA-05 Quick Connector (not supplied) from LED driver to main cable
(12/2, 10/2 or 8/2 only)

MOUNTING:  Stainless Steel surface mount bracket; two screws and wall anchors provided;
Face plate attaches to bracket with two provided set screws

FINISH:  Aluminum – Black texture polyester powder coat; optional finishes available
Brass – Unfinished; optional finishes available

CAUTION: MUST BE POWERED BY LOW VOLTAGE AC MAGNETIC TRANSFORMER ONLY